Friday, 11 November 2011

Check your PC infgected or not by using DOS prompt

How to check using Dos whether my PC is infected or not, this is the simplest way to check it out whether ur infected or not...

Follow the given instructions to check it out.

When you first turn on you computer (BEFORE DIALING INTO YOUR ISP),
open a MS-DOS Prompt window (start/programs MS-DOS Prompt).
Then type netstat -arn and press the Enter key.
Your screen should display the following (without the dotted lines
which I added for clarification).

-----------------------------------------------------------------------------
Active Routes:

Network Address Netmask Gateway Address Interface Metric
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
255.255.255.255 255.255.255.255 255.255.255.255 0.0.0.0 1

Route Table

Active Connections

Proto Local Address Foreign Address State

--------------------------------------------------------------------------------

If you see anything else, there might be a problem (more on that later).
Now dial into your ISP, once you are connected;
go back to the MS-DOS Prompt and run the same command as before
netstat -arn, this time it will look similar to the following (without
dotted lines).

-------------------------------------------------------------------------------------

Active Routes:

Network Address Netmask Gateway Address Interface Metric
0.0.0.0 0.0.0.0 216.1.104.70 216.1.104.70 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
216.1.104.0 255.255.255.0 216.1.104.70 216.1.104.70 1
216.1.104.70 255.255.255.255 127.0.0.1 127.0.0.1 1
216.1.104.255 255.255.255.255 216.1.104.70 216.1.104.70 1
224.0.0.0 224.0.0.0 216.1.104.70 216.1.104.70 1
255.255.255.255 255.255.255.255 216.1.104.70 216.1.104.70 1

Route Table

Active Connections

Proto Local Address Foreign Address State
TCP 0.0.0.0:0 0.0.0.0:0 LISTENING
TCP 216.1.104.70:137 0.0.0.0:0 LISTENING
TCP 216.1.104.70:138 0.0.0.0:0 LISTENING
TCP 216.1.104.70:139 0.0.0.0:0 LISTENING
UDP 216.1.104.70:137 *:* 

--------------------------------------------------------------------------------

What you are seeing in the first section (Active Routes) under the heading of
Network Address are some additional lines. The only ones that should be there
are ones belonging to your ISP (more on that later). In the second section
(Route Table) under Local Address you are seeing the IP address that your ISP
assigned you (in this example 216.1.104.70).

The numbers are divided into four dot notations, the first three should be
the same for both sets, while in this case the .70 is the unique number
assigned for THIS session. Next time you dial in that number will more than
likely be different.

To make sure that the first three notation are as they should be, we will run
one more command from the MS-DOS window.
From the MS-DOS Prompt type tracert /www.yourispwebsite.com or .net
or whatever it ends in. Following is an example of the output you should see.

---------------------------------------------------------------------------------------

Tracing route to /www.motion.net [207.239.117.112]over a maximum of 30 hops:
1 128 ms 2084 ms 102 ms chat-port.motion.net [216.1.104.4]
2 115 ms 188 ms 117 ms chat-core.motion.net [216.1.104.1]
3 108 ms 116 ms 119 ms www.motion.net [207.239.117.112]
Trace complete.

------------------------------------------------------------------------------------------

You will see that on lines with the 1 and 2 the first three notations of the
address match with what we saw above, which is a good thing. If it does not,
then some further investigation is needed.

If everything matches like above, you can almost breath easier. Another thing
which should you should check is programs launched during startup. To find
these, Click start/programs/startup, look at what shows up. You should be
able to recognize everything there, if not, once again more investigation is
needed.

-------------------------------------------------------------------------------------------

Now just because everything reported out like we expected (and demonstrated
above) we still are not out of the woods. How is this so, you ask? Do you use
Netmeeting? Do you get on IRC (Internet Relay Chat)? Or any other program
that makes use of the Internet. Have you every recieved an email with an
attachment that ended in .exe? The list goes on and on, basically anything
that you run could have become infected with a trojan. What this means, is
the program appears to do what you expect, but also does just a little more.
This little more could be blasting ebay.com or one of the other sites that
CNNlive was talking about.

What can you do? Well some anti-virus software will detect some trojans.
Another (tedious) thing is to start each of these "extra" Internet programs
one at a time and go through the last two steps above, looking at the routes
and connection the program uses. However, the tricky part will be figuring
out where to tracert to in order to find out if the addresses you see in
step 2 are "safe" or not. I should forewarn you, that running tracert after
tracert, after tracert might be considered "improper" by your ISP. The steps
outlined above may not work exactly as I have stated depending upon your ISP,
but with a true ISP it should work. Finally, this advise comes with NO
warranty and by following my "hints' you implicitly release me from ANY and
ALL liability which you may incur.


Other options

Display protocol statistics and current TCP/IP network connections.
Netstat [-a] [-e] [-n] [-s] [-p proto] [-r] [intervals]

-a.. Display all connections and listening ports.
-e.. Display Ethernet statistics. This may be combined with the -s option.
-n.. Diplays address and port numbers in the numerical form.
-p proto..Shows connections for the protocol specified by proto; proto may be
TCP or UDP. If used with the -s option to display per-protocol statistics,
proto may be TCP, UDP, of IP.
-r.. Display the routing table.
-s.. Display per-protocol statistics. By default, statistics are shown for TCP
UDP and IP; the -p option may be used to specify a subset of the default
interval..Redisplay selected statistics, pausing intervals seconds between each
display. If omitted. netstat will print the current configuration information
once

Password Stealer for all Messengers


Password Stealer for all Messengers, hack any messengers password using this software...

For doing this u have build ur pc into server.

Coder: c4!N
Compiler: Delphi
testet : Windows XP SP2
Source-Protector: Themida
Description: The UnLimited PW Stealer is a high-quality PW Stealer with the following characteristics:

hack the following accounts:

PW Messanger Packet

MSN Messenger
Windows Messenger
Yahoo Messenger Google Talk
ICQ Lite
AOL Instand Messenger/Netscape 7
Trilian
Miranda
GAIM

PW Mail Packet

Outlook Express
Microsoft Outlook 2000/XP/2003
IncrediMail
Mozilla Thunderbird
Netscape
Group Mail Free, Gmail
Yahoo Mail
Hotmail / MSN Mail
Eudora

Protected Storage PW Packet

Outlook Passwords
Auto Completet password in IE
Password protected sites in IE
MSN Explorer Passwords

Steam PW Packet

Steam Username
Steam Password
Steam game-path

Game Key Stealer

UT 2003/2004
Battlefield 1942 / Road to Rome / Scret Weapons / Vietnam
Need for Speed Hot Pursuit 2
James Bond 007 Nightfire
Command & Conquer Generals / Zero Hour
SimCity 4
Call of Duty 2 / United Offensive / 1
SWAT 4 / EXP

Windows Info Packet

Windows Username, Windows Computername ect. ect.

Other options are:

FTP Upload Information
Crypt the ploadfile PW Files
Crypt the FTP Settings
Melt Server (Self-Delete after Execute)
File Attribut on hidden set
Icon Changer
UPX Packer
and many more Smiley
UnLimited_PW_-_Stealer_0.40.rar
Description:
Download
Filename: UnLimited_PW_-_Stealer_0.40.rar
Filesize: 3.6 MB

Download Here

Password:
http://zone.forums1.net

Just copy & paste the above code where it asks for the passwords...

Gmail Passowrd Hacking


How to hack Gmail passwords?hacking Gmail is no more enigma...By using these softwares u can hack Gmail passwords...


Recover Gmail Password 2.0.1.5
Recover gmail password reveal stored yahoo msn rediffmail asterisk **** password.
Download

Thursday, 10 November 2011

Fake Yahoo Messenger


Fake Yahoo Messenger, This is one of the hacking trick to hack yahoo passwords, actually this is the fake yahoo messenger whenever anyone login in this messenger his yahoo ID and Passwords are saved in ur system...


Steps:
Step 1 - Install Microsoft .NET Framework.(I think almost everyone has this in their computers if don't click here to download )

Step 2 - click here to get fake yahoo messenger

Step 3 - Rename that YPager as Yahoo Messenger.

Step 4 - Tell any of ur friends to login, try to fish them by saying this is the new version of yahoo try it!!!

Step 5 - Open C:\yahoo.txt & dats ur frnds yahoo id & passwords..

Guide to Slipstreaming SP2

Here is the Guide to Slipstreaming Service Pack 2..

Note: All images are hosted with ImageShack.

• This guide will allow you to sucsessfully install Service Pack 2 on the original (gold) code of Microsoft Windows XP.
• The version of Windows you have purchased/downloaded does not matter as far as slipstreaming (they're all the same anyway).

Things you need:
• Microsoft Windows XP (duh :P)
• Service Pack 2:
click here to get it....

• Windows XP Boot sector click here to get it.
• Nero Burning Rom (find it on SoD)

Step One
Insert the Microsoft Windows XP CD into your CD-ROM drive, and create a new folder on your hard-drive labelled "CD".

Copy all of the files from the Windows XP CD to the "CD" folder.


Step Two
Download Service Pack 2 and place it within the root of your hard-drive.
Ex: C:\ D:\ etc..


Step Three
Go to Start -> Run and type in "F:\WindowsXP-KB835935-SP2-ENU.exe -s:F:\CD" (depending on where you put the folder)

The actual command is -s:drive:\folder


Step Four
The Service Pack 2 updater will automatically slipstream Service Pack 2 into your "CD" folder.


Step Five
If you browse back to the CD folder, you'll notice that new folders and files appeared from the SP2 update. At this point, you can include any software you wish onto this CD, but make sure that the size of the folder does not exceed the media you are burning on. If you're not sure, a regular CD is 700 megabytes.


Step Six

Go to Start and Search for files and folders. Go to all files and folders, and type in "wpa.dbl". This is the activation file for your current installed version of XP. Make a copy of the file and paste it into your CD folder.


Step Seven
Open up Nero Smartstart, and click on the icon that looks like two people. This turns the program into "professional mode". Search for create a bootable CD. Click on it, and make sure that your settings agree with the following picture; also make sure that you downloaded the Windows XP boot sector.


Step Eight
Continue onto the next tab, and make sure that your settings agree with the picture:


Step Nine
In this step, you can label your CD whatever the hell you want. I recommend WXPSP2_EN.


Step Ten
Go to "new" and locate your CD folder. Drag all of the files in the CD folder to the compilation window on the right, and nero will calculate how much disk space was used. If it exceeds 700 MB, get rid of some programs that you added to the CD. If you didn't add anything; just push burn.


Step Eleven
Make sure that your settings check with the picture:


Step Twelve
Just push burn, and that's it! Congratulations, you just made a bootable Win XP CD with SP2 slipstreamed!

Wednesday, 9 November 2011

Disable Compression on XP, NTFS Partition

How to disable compression on windows Xp, NTFS partition, Disk Cleanup from ur computer...
On an NTFS partition, Disk Cleanup can compress old files to save space. But calculating the savings and performing the compression often take a long time, and on some systems, Disk Cleanup hangs during the process. If that happens, or if you don't care to wait, use this Registry tweak to disable thecompression: Delete the key
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\VolumeCaches\Compress Old Files.

Create An Ftp Server On Your Pc


How to create an FTP Server on your computer using Ser-u,their is a cool trick for changing ur pc into server.Hack yahoo password by making servers & hack any messengers passwords.

Process 1:
First of all u have to get an static IP-Address.
Need a a static ip-address for ur FTP Server.Necessity for getting this static ip-address is ur not suppose to use ur own IP-Address.The main reason is u dont want to show ur IP-Address to everyone , there are many other reasons too but leave them aside..
1.Goto no-ip & create urself a free account.
2.Now ur account been created & ll receive ur account password via mail to ur email address.
3.After getting ur password login to ur account of no-ip.com
4.After getting logged in, click upon add a HOST its on the left menu.
5.Type any hostname u want (eg:-saien) & select any domain from da given list (eg:-ftpserve.com) Click on Submit.
6.Now u have owned ur own static address (example: saien.serveftp.com)
7.Now click downloads button which is present above on the page & click on which operating system ur using & den download DNS update client or u can download it fromhere directly, this is for microsoft window users..
8.After getting downloaded, u have to install this software & login here with ur email addresss & p/w wen asked for it.
9.At last tick on da check box present at the static address.
10.U have ur own static web address.

Process 2:
Installation & setting of the FTP-Server
1.You have to install Serv-U 4.1.03 , download this software from here
2. Run Serv-U & use da wizard to setup ur FTP.
3.Click on next until u have been asked for IP-Address, leave it as it is & click upon next.
4.Enter ur domain name u have registered (example: rkchoolie.serveftp.com) it above in da domain field & click upon next.
5.U ll be asked for anonymous access, select No & click upon next.
6.Next u ll be asked for creating a named account, select yes & click upon next.
7.Choose any user name u wish (eg:-saien) & clcik upon next.
8.Enter password for dis account (eg:-@1254Rwn) for security purpose choose difficult password.
9.U ll be asked for da home directory for the account which u have created above.Select directory & click upon next.
10.Click on yes for locking dis account to da home directory, doing dis da user cannot further move up into home directory, click upon next.
11.At last ur account has been created click finish.

Process 3:
Configuring the user accounts which u have been created.
1.On the left tree-menu, select da account which u have been created above & den click upon General Tab.
2.Goto Hide 'Hidden' Files.
3. Check Allow only and enter the number one in the box.
4.Set da maximum downloading speed upto wat extent u want.As this is an account so many ll be using so set it low(eg:-10-20) to save ur bandwidth.Don't leave it blank as uers can download with full bandwidth.
5.choose how many users u want to login at on time.It depends on ur connection speed try these (56 - 1, ISDN - 3, ADSL or cable - 5-6 users.)
6.Click upon Dir Access Tab.
7.Now u can c home folder here.Highlight it & make ur permission.
8.If u want only users to download check only these Read,List & Inherit.
9.If u want ur users to upload into ur server & bu tto only 1 particular folder but not to downlaod, click upon dat add button & then select dat folder, Now u have to highlight dat folder & set these permissions on dat folder.Check,Write,Appened,List,Create & Inherit after setting these permissions click on the arrow which is present at the bottom right-hand corner.U want dis upload folder 2 be list first, before da home folder.
10.If der is any folder which u dont want anyone to access it, & it is present in the home folder, den click da add button & den select da folder.Now u have to highlight dat folder & see dat no all da checkboxes are left.After doing this click upon upper arrow which is present at bottom right hand corner.
11.There r many things u can do, These are only the basics....
12. Ur server is now ready to be connected..
13. Login with ur username & password...

WinRAR


Hi frnds...

WinRAR is the software which is used to compress the data, it is better than a zip file..
It takes less space for the same amount of data which zip file takes, using this u can read .RAR files
winrar extrats the .RAR files & compresses ur data to .RAR file...You can download WinRAR here.

Saved Passwords in IE or Firefox Are Not Safe


Do U think ur saved passwords in Internet Explorer and Mozilla Firefox are safe?? really!! Check out here how much you are:

Whenever u type passwords into any web forms, in both Internet Explorer & Mozilla Firefox, its prompt out whether 2 remember u passwords, & many of us clicks on yes & our passwords are saved in the browser
remember my password firefox remember password
Many of us think this “Remember Me” option in IE or Firefox is very much useful but the risky part is dat they keep ur login credential at risk.
View stored passwords in Internet Explorer:
Although Internet Explorer store ur passwords in Windows Registry database, but the risk is that anyone who can operate a computer can reveal ur hidden passwords by using IE PassView.
Look at this:
internet explorer passwords
View stored passwords in Firefox:
For the Firefox users it is much more easier to reveal ur saved passwords which are stored inside
Way: Tools -> Options -> Security -> Show Passwords. Dats it shows ur all saved passwords...
firefox passwords
Friends anyone can view ur hidden passwords who is having a bit knowledge on computer can reveal ur passowrds..
How to Keep urself safe:
Uncheck “Prompt me to save passwords” in Internet Explorer and “Set Master Password” in Mozilla Firefox.

Tuesday, 8 November 2011

Enter Sites in SKL that are blocked


Now you have the question how to enter the sites which are blocked...
How 2 enter sites in skl that are blocked????this is your question how??
just follow the below steps you can bypass the blocked sites...

Start>Run and type in cmd .Once your command prompt box opens, type ''www.yoururlhere.com" Press enter and you should see some numbers that looks like an IP address pop up, copy those numbers.Open up your school internet browser, and type in those numbers that you copied in the command prompt. Now you can access your website!